Bơm thủy lực 728619E – 150 MPa

Hydraulic pump 150 MPa

150 MPa – (21 750 psi)
/uploads/tai-lieu-ky-thuat/2015_04/oil0111v-_ng.jpg OIL0111V NG

The 728619 E is a two-stage pump suitable for use with SKF Supergrip bolts and for the mounting and dismounting of bearings or components where a maximum pressure of 150 MPa (21 750 psi) is required. The pump is supplied with a 3 000 mm (118 in.) pressure hose, quick connect coupling and mating nipple and pressure gauge. The pump is filled with http://www.skf.com/group/products/maintenance-products/hydraulic-tools-for-mounting-and-dismounting/hydraulic-tool-accessories/mounting-fluid/index.html SKF mounting fluid LHMF 300, is supplied with an extra litre and is protected in a sturdy metal case.

Oil container capacity 2 400 cm³ (146.5 in.³)
Two stage pressure pumping
Extra litre of mounting fluid
Packed in a sturdy protective metal case

Applications

SKF Supergrip bolts
All other oil injection applications where the maximum pressure is 150 MPa (21 750 psi)
All sizes http://www.skf.com/group/products/maintenance-products/hydraulic-tools-for-mounting-and-dismounting/hydraulic-nuts/index.html HMV ..E hydraulic nuts

Technical data

Designation

728619 E

Maximum pressure

150 MPa (21 750 psi)

Volume/stroke 1st Stage

20 cm3 below 2,5 MPa
(1.2 in.3 below 362 psi)

Volume/stroke 2nd Stage

1,00 cm3 above 2,5 MPa
(0.06 in.3 above 362 psi)

Oil container capacity

2 400 cm3 (146.5 in.3)

Length of pressure hose

3 000 mm (118 in.)

Connection nipple

G1/4 quick connection

Weight

11,4 kg (25 lb)