Cảo cải tiến, mở bằng lò xo kiểu TMMA
- Thứ tư - 29/04/2015 12:07
- In ra
- Đóng cửa sổ này
Độc đáo, dễ sử dụng với cơ cấu lò xo để bám vào lưng của chi tiết cần cảo
Kết cấu tự khóa làm giảm nguy cơ trượt của chân cảo
Có 3 cỡ với lực cảo tối đa từ 6 đến 12 tấn (60 KN đến 120 KN)
Bộ trợ lực thủy lực tự chọn (TMHS 75, TMHS 100) cho loại TMMA 80 và TMMA 120
Ký hiệu đặt hàng
TMMA 60 TMMA 80 TMMA 120
TMMA pullers series: mechanical SKF EasyPull
Safe and simple bearing dismounting
- Sturdy design allows dismounting of components even in the tightest application in a safe manner
- The unique red rings spring-operated opening mechanism allows the EasyPull to be placed behind the component with one movement of the hands
- Self-locking arms help prevent the risk of puller slipping under load
- Double hexagonal heads allow easier application of withdrawal force
- Self-centring capability and nosepiece help to avoid damage to shaft
- Efficient use of time due to quick dismounting
- Available in three sizes with a withdrawal force of 60, 80 or 120 kN (6.7, 9.0 or 13.5 ton US), enabling easy selection
- Hydraulic force generators available as an accessory for the 80 and 120 kN versions
|
Technical data TMMA 60 |
|
|
General |
|
|
Width of grip external, minimum |
36 mm (1.4 in.) |
|
Width of grip external, maximum |
150 mm (5.9 in.) |
|
Effective arm length |
150 mm (5.9 in.) |
|
Maximum withdrawal force |
60 kN (6.7 ton US) |
|
Total weight |
4,0 kg (8.8 lb) |
|
Claw dimensions |
|
|
Claw height |
7,5 mm (0.30 in.) |
|
Claw length |
15 mm (0.6 in.) |
|
Claw width |
20 mm (0.8 in.) |
|
Force generators |
|
|
Hexagon on puller or adapter |
27 mm |
|
Hexagon on mechanical spindle |
17 mm |
|
Max torque |
105 Nm (75 lbf ft) |
|
Diameter nose piece |
24 mm (0.9 in.) |
|
Adapter: possible to upgrade |
|
|
Spare parts |
|
|
Arm |
TMMA 60-1 |
|
Spindle with nose piece (and adapter) |
TMMA 60-2 |
|
Opening mechanism |
TMMA 60-3 |
|
Accessories |
|
|
Puller protection blanket |
|
|
Gloves |
|
|
Hydraulic spindle |
- |
|
Spindle grease |
|
|
Tri- section pulling plates |
|
|
Technical data TMMA 80 |
|
|
General |
|
|
Width of grip external, minimum |
52 mm (2.0 in.) |
|
Width of grip external, maximum |
200 mm (7.8 in.) |
|
Effective arm length |
200 mm (7.8 in.) |
|
Maximum withdrawal force |
80 kN (9.0 ton US) |
|
Total weight |
5,7 kg (12.6 lb) |
|
Claw dimensions |
|
|
Claw height |
9,8 mm (0.39 in.) |
|
Claw length |
18 mm (0.7 in.) |
|
Claw width |
28 mm (1.1 in.) |
|
Force generators |
|
|
Hexagon on puller or adapter |
30 mm |
|
Hexagon on mechanical spindle |
22 mm |
|
Max torque |
175 Nm (125 lbf ft) |
|
Diameter nose piece |
26 mm (1.0 in.) |
|
Adapter: possible to upgrade |
|
|
Spare parts |
|
|
Arm |
TMMA 80-1 |
|
Spindle with nose piece (and adapter) |
TMMA 80-2 |
|
Opening mechanism |
TMMA 75H/80-3 |
|
Accessories |
|
|
Puller protection blanket |
|
|
Gloves |
|
|
Hydraulic spindle |
|
|
Spindle grease |
|
|
Tri- section pulling plates |
|
|
Technical data TMMA 120 |
|
|
General |
|
|
Width of grip external, minimum |
75 mm (3.0 in.) |
|
Width of grip external, maximum |
250 mm (9.8 in.) |
|
Effective arm length |
250 mm (9.8 in.) |
|
Maximum withdrawal force |
120 kN (13.5 ton US) |
|
Total weight |
10,6 kg (23.4 lb) |
|
Claw dimensions |
|
|
Claw height |
13,8 mm (0.54 in.) |
|
Claw length |
24 mm (0.9 in.) |
|
Claw width |
40 mm (1.6 in.) |
|
Force generators |
|
|
Hexagon on puller or adapter |
32 mm |
|
Hexagon on mechanical spindle |
24 mm |
|
Max torque |
265 Nm (195 lbf ft) |
|
Diameter nose piece |
28 mm (1.1 in.) |
|
Adapter: possible to upgrade |
|
|
Spare parts |
|
|
Arm |
TMMA 120-1 |
|
Spindle with nose piece (and adapter) |
TMMA 120-2 |
|
Opening mechanism |
TMMA 100H/12-3 |
|
Accessories |
|
|
Puller protection blanket |
|
|
Gloves |
|
|
Hydraulic spindle |
|
|
Spindle grease |
|
|
Tri- section pulling plates |
|