Bộ cảo vấu thủy lực kiểu TMHP 10E
- Thứ tư - 29/04/2015 12:05
- In ra
- Đóng cửa sổ này
Bộ cảo vấu thủy lực kiểu TMHP 10E
Có piston thủy lực với van an toàn tạo lực cảo 10 tấn
Hành trình piston dài 80mm
Ba bộ chân cảo cho độ mở tối đa 280mm, độ dài tay cảo với 200mm
Cơ cấu tự định tâm chân cảo làm giảm hiện tượng trượt chân cảo khi làm việc
Ký hiệu đặt hàng
TMHP 10E
Effortless bearing dismounting up to 100 KnHydraulic jaw puller kit
The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US). The versatile puller kit includes three different arm sizes and can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application.
- High load rating of 100 kN (11.2 ton US) makes the puller suitable for a variety of dismounting jobs
- The 3 different arm sizes, with a maximum effective arm length of 200 mm (7.8 in), make the TMHP 10E suitable for use in a wide range of applications
- The self-locking arms minimise the risk of the puller slipping from the application when under load
- Hydraulic spindle facilitates effortless dismounting
- The hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload by limiting the applied force to 100 kN (11.2 ton US)
- Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
- Extension pieces of the hydraulic spindle allow quick adaptation to pulling length
- The spring-loaded centre point of the hydraulic spindle allows easy centring of the puller on the shaft without damaging it